High Temperature Tape: Heat Resistant & Thermal Insulating Silicone Rubber Coated Fiberglass (Fibreglass) Tape
500°F / 260°C continuous rating with weld splatter / molten metal splash protection
500°F / 260°C continuous rating with weld splatter / molten metal splash protection
· Silicone rubber coated fiberglass tape is used to protect
critical hydraulic hoses, lines, wiring and cables from heat,
flame, molten metal splash, slag, welding splatter, grinding
sparks, contamination, ozone, UV and abrasion.
.
· One side coated heavy duty tapes; Two versions:
1) Knitted tape with silicone rubber coating.
2) Woven base fabric with silicone rubber coating.
This tape is slit from a coated fabric roll.
· Both tapes provide thermal insulation, burn through
protection and electrical space factor insulation,
energy savings and personnel protection.
· Two side coated tapes - in thicknesses of .009" through
.04". Typically used for making shields and guards, or
wrapping over other insulation products. These tapes are slit
from roll fabrics. Colors are Red, White and Silver-Gray.
critical hydraulic hoses, lines, wiring and cables from heat,
flame, molten metal splash, slag, welding splatter, grinding
sparks, contamination, ozone, UV and abrasion.
.
· One side coated heavy duty tapes; Two versions:
1) Knitted tape with silicone rubber coating.
2) Woven base fabric with silicone rubber coating.
This tape is slit from a coated fabric roll.
· Both tapes provide thermal insulation, burn through
protection and electrical space factor insulation,
energy savings and personnel protection.
· Two side coated tapes - in thicknesses of .009" through
.04". Typically used for making shields and guards, or
wrapping over other insulation products. These tapes are slit
from roll fabrics. Colors are Red, White and Silver-Gray.
Very High Temperature, Heat Resistant & Thermal Insulating Fiberglass Tape - High Insulation Value and Personnel Protection
1200°F / 648°C continuous rating
1200°F / 648°C continuous rating
· High temperature heat resistant fiberglass Insulation and
gasket tape products are used to protect a wide range of
hoses, lines, tubes, wires and cables from high
temperatures and flame.
· Also used as a gasket and support tape.
· Ideal where molten metal exposure is not an issue and a
lower cost alternative to silicone rubber coated
fiberglass (firesleeve).
· Tape is available with a PSA coating.
· This tape provides thermal and electrical insulation, energy
savings and personnel protection.
gasket tape products are used to protect a wide range of
hoses, lines, tubes, wires and cables from high
temperatures and flame.
· Also used as a gasket and support tape.
· Ideal where molten metal exposure is not an issue and a
lower cost alternative to silicone rubber coated
fiberglass (firesleeve).
· Tape is available with a PSA coating.
· This tape provides thermal and electrical insulation, energy
savings and personnel protection.
Knitted Fiberglass Tape
Very High Temperature, Heat Resistant & Thermal Insulating Vermiculite Coated Fiberglass Tape
1500°F / 815°C continuous rating
1500°F / 815°C continuous rating
Extreme High-Temperature, Heat Resistant & Thermal Insulating InSilMax Silica Tape
2300°F / 1260°C continuous rating
2300°F / 1260°C continuous rating
· Usable to 2000°F / 1093°C continuously, and 2300°F / 1260°C
for extended periods without degradation. It melts above
3000°F / 1648°C.
· Available as a slit tape from fabric roll, and as a folded and
stitched tape, and a woven tape. This tape provides thermal
and electrical insulation, energy savings and personnel
protection.
for extended periods without degradation. It melts above
3000°F / 1648°C.
· Available as a slit tape from fabric roll, and as a folded and
stitched tape, and a woven tape. This tape provides thermal
and electrical insulation, energy savings and personnel
protection.
Extreme +Plus High-Temperature Ceramic Fiber Gasket Seal Tape
2300°F / 1260°C continuous rating
2300°F / 1260°C continuous rating
· Wire, Cable and hose protection. Gasket and
sealing applications.
· Available in plain style or also bolt-hole drop warp style
(ladder tape) for easy installation over access door
and flange studs.
· An excellent replacement for asbestos materials.
· Melts above 3000°F / 1648°C. This tape provides thermal
and electrical insulation (space factor), energy savings
and personnel protection.
sealing applications.
· Available in plain style or also bolt-hole drop warp style
(ladder tape) for easy installation over access door
and flange studs.
· An excellent replacement for asbestos materials.
· Melts above 3000°F / 1648°C. This tape provides thermal
and electrical insulation (space factor), energy savings
and personnel protection.
High-Temperature PTFE Dispersion Coated Fiberglass Gasket Seal Tape
550°F / 287°F continuous rating
550°F / 287°F continuous rating
· 550°F / 287°C continuous use in harsh chemical
environments
environments
High-Temperature, Heat Resistant Radiant Heat Reflective Tape
Fiberglass base fabric with aluminum coating reflects over 95% of the radiant heat striking its surface.
Fiberglass base fabric with aluminum coating reflects over 95% of the radiant heat striking its surface.
· Made by slitting an aluminum foil coated fiberglass or
aluminized PET film coated fiberglass roll fabric into
tapes of custom width.
· Keeps underlying wires, cables, hoses and pipes
cool by reflecting radiant heat. Available as a plain
tape or with a PSA self-adhesive.
aluminized PET film coated fiberglass roll fabric into
tapes of custom width.
· Keeps underlying wires, cables, hoses and pipes
cool by reflecting radiant heat. Available as a plain
tape or with a PSA self-adhesive.
PTFE High-Temperature & Chemical Resistance Tape with Acrylic or Silicone Adhesive
550°F / 287°F continuous rating with exceptional chemical resistance
550°F / 287°F continuous rating with exceptional chemical resistance
· Provides a smooth and non-stick surface - used on
production line runners, guides and chutes for easy product
movement. Also used as an insulation buffer on RF
sealers, L Bar and bag sealers.
· Also an electrical insulation tape.
· Version meeting MIL-I-23594 / MIL-I-59474 / AA-59474
available
production line runners, guides and chutes for easy product
movement. Also used as an insulation buffer on RF
sealers, L Bar and bag sealers.
· Also an electrical insulation tape.
· Version meeting MIL-I-23594 / MIL-I-59474 / AA-59474
available
"Tacky Cloth" Gasket Tape
550°F / 287°F continuous rating
550°F / 287°F continuous rating
· "Tacky Cloth" is a fiberglass base with a special white
formulation that remains tacky. It is faced with a protective
film that is removed before installation.
· A wire inserted version has a twisted brass wire formed
with the fill yarns, providing additional strength.
· A dusted version is available (prevents self-sticking) and a
red & black version.
formulation that remains tacky. It is faced with a protective
film that is removed before installation.
· A wire inserted version has a twisted brass wire formed
with the fill yarns, providing additional strength.
· A dusted version is available (prevents self-sticking) and a
red & black version.
HHP31 High Temperature Tape - Non Asbestos - Certification Available
1000°F / 537°C continuous rating
1000°F / 537°C continuous rating
· Meets HHP-31 F TY1.
· Certification available.
· This tape is made from a base fabric which is strengthened
with an interwoven stainless steel wire which accounts for
10% of the fabric's weight.
· Each yarn is composed of 3 fiberglass filaments, interwoven
with 2 wires, each 304 stainless steel (.0045" diameter), all
twisted together.
NSN 5330-00-027-2535 & NSN 5330-00-268-9882
· Certification available.
· This tape is made from a base fabric which is strengthened
with an interwoven stainless steel wire which accounts for
10% of the fabric's weight.
· Each yarn is composed of 3 fiberglass filaments, interwoven
with 2 wires, each 304 stainless steel (.0045" diameter), all
twisted together.
NSN 5330-00-027-2535 & NSN 5330-00-268-9882
High-Temperature, Heat and Flame Resistant Silicone End Wrap & Electrical Tape - Type I & II
Meets MIL-I-46852, AA-59I63, and
MIL-I-22444 Specifications
500°F / 260°C continuous rating with flame, spark and light weld splatter protection
Meets MIL-I-46852, AA-59I63, and
MIL-I-22444 Specifications
500°F / 260°C continuous rating with flame, spark and light weld splatter protection
· Used to seal the ends of firesleeve to prevent wicking of
liquids such as water, oil, hydraulic fluid.
· Contains no adhesive - self fuses to itself when stretched
and over-wrapped.
· Available as Type I rectangular or Type II triangular profile.
· Available meeting AA59163, Mil-i-46852 and
MIL-I-22444 specifications for electrical insulation
applications.
· 34 tapes with NSN / NATO National Stock Number
assignment
liquids such as water, oil, hydraulic fluid.
· Contains no adhesive - self fuses to itself when stretched
and over-wrapped.
· Available as Type I rectangular or Type II triangular profile.
· Available meeting AA59163, Mil-i-46852 and
MIL-I-22444 specifications for electrical insulation
applications.
· 34 tapes with NSN / NATO National Stock Number
assignment
Ladder / Bolt-Hole Drop-Warp Tape for Gasket Flange and Access Door Sealing: High Temperature Fiberglass, Coated Fiberglass, Silica and Ceramic Tapes
500°F / 260°C to 2300°F / 1260°C
500°F / 260°C to 2300°F / 1260°C
· An excellent gasket tape for access doors and panels
as the center long yarns are missing for easy fastener
insertion.
as the center long yarns are missing for easy fastener
insertion.
Woven Fiberglass Tape
High-Temperature & Heat Resistant Silicone Adhesive Fiberglass Glass Cloth Electrical Tape meeting
MIL-I-19166
392°F / 200°C continuous rating
MIL-I-19166
392°F / 200°C continuous rating
· 3000 volt dielectric.
· .007" thick.
· Meets Mil-i-19166
· Silicone High Temperature Adhesive
· Industrial version with same construction
available without meeting Mil spec.
· .007" thick.
· Meets Mil-i-19166
· Silicone High Temperature Adhesive
· Industrial version with same construction
available without meeting Mil spec.
Share this page.....
2/18
High Temperature, Heat, Flame, Fire, Spark, Weld Splatter Resistant
Electrical and Thermal Insulating Tapes
Electrical and Thermal Insulating Tapes
ePTFE Expanded High-Temperature & Chemical Resistance Tape with adhesive
550°F / 287°F continuous rating with exceptional chemical resistance
550°F / 287°F continuous rating with exceptional chemical resistance
· EPTFE Expanded PTFE Joint Seal Tape.
· Provides a smooth surface for gasket and seal forming
on flanges.
· Compressible and seals against air pressure and liquids.
· Provides a smooth surface for gasket and seal forming
on flanges.
· Compressible and seals against air pressure and liquids.
High-Temperature PTFE Resin Coated Fiberglass Low Friction tape - with adhesive
550°F / 287°F continuous rating
550°F / 287°F continuous rating
· PTFE Impregnated slit tape with acrylic or silicone
PSA self adhesive.
· 550°F / 287°C continuous use in harsh chemical
environments.
· Used to make low friction area in guides and
chutes for product and packaging motion.
· Used as a high temperature protection tape in
hot wire sealers and bag closure machines.
PSA self adhesive.
· 550°F / 287°C continuous use in harsh chemical
environments.
· Used to make low friction area in guides and
chutes for product and packaging motion.
· Used as a high temperature protection tape in
hot wire sealers and bag closure machines.
High-Temperature Graphite Crinkled Gasket Tape
950°F / 510°F continuous rating
950°F / 510°F continuous rating
Weld Backing Tape
550°F / 287°F continuous rating
550°F / 287°F continuous rating
· Protects the weld by keeping the gas pooled behind
during manual or automated welding.
· 3 versions available for currents from 80 through
240 amps.
· Easy application and removal.
during manual or automated welding.
· 3 versions available for currents from 80 through
240 amps.
· Easy application and removal.
Very High Temperature, Heat Resistant & Thermal Insulating ProSil
Fiberglass / Silica Blended
Gasket Seal Tape
1350°F / 732°C continuous rating
Fiberglass / Silica Blended
Gasket Seal Tape
1350°F / 732°C continuous rating
· Very High Temperature fiberglass base fabric is impregnated
with vermiculite dispersant, resulting in a product with higher
continuous temperature capability and added abrasion
resistance.
· Vermiculite coated sleeve can be used for the
same applications and plain Fiberglass materials, plus it
can also be used to protect copper and aluminum tubing.
· This tape provides thermal and electrical insulation,
energy savings and personnel protection.
with vermiculite dispersant, resulting in a product with higher
continuous temperature capability and added abrasion
resistance.
· Vermiculite coated sleeve can be used for the
same applications and plain Fiberglass materials, plus it
can also be used to protect copper and aluminum tubing.
· This tape provides thermal and electrical insulation,
energy savings and personnel protection.
· Pure graphite. Available with self adhesive
· 550°F / 287°C continuous use in harsh chemical
environments.
· 550°F / 287°C continuous use in harsh chemical
environments.
· Very High Temperature fiberglass/silica blended base
fabric is resulting in a product with higher continuous
temperature capability than plain fiberglass, but at a lower
cost than silica.
· This tape provides thermal insulation, heat and flame
exposure protection and electrical space factor insulation,
energy savings and personnel protection..
· Excellent for protecting wires, cables and hoses, and as
a gasket seal tape for access doors and flanges.
fabric is resulting in a product with higher continuous
temperature capability than plain fiberglass, but at a lower
cost than silica.
· This tape provides thermal insulation, heat and flame
exposure protection and electrical space factor insulation,
energy savings and personnel protection..
· Excellent for protecting wires, cables and hoses, and as
a gasket seal tape for access doors and flanges.
Fabricated insulated thermal wrap for hose and pipe - excellent for steam pipe and heat tracer applications. Energy savings and personnel burn protection.
500°F / 260°C continuous rating
500°F / 260°C continuous rating
· Excellent thermal insulation for hot pipes and hoses.
· Popular for steam line heat retention, and heat tracer
thermal protection.
· Easy solution for providing personnel burn protection from
hot pipes and hoses.
· Available with an internal liner to prevent contamination of
the insulation layer from liquids, dirt and contaminants.
· Standard 20 foot lengths can be run along pipe length or
wrapped spirally around pipe.
· Easy to install and remove.
· Popular for steam line heat retention, and heat tracer
thermal protection.
· Easy solution for providing personnel burn protection from
hot pipes and hoses.
· Available with an internal liner to prevent contamination of
the insulation layer from liquids, dirt and contaminants.
· Standard 20 foot lengths can be run along pipe length or
wrapped spirally around pipe.
· Easy to install and remove.
Woven Fiberglass Tape
Knitted Fiberglass Tape
1 side coated tape:
2 side coated tape:
Firesleeve End Wrap Tape:
MIL Spec Electrical Insulation Tape:
NSN / NATO Tape:
High-Temperature PTFE Resin Coated Fiberglass tape - FDA Food Contact Approved
550°F / 287°F continuous rating
550°F / 287°F continuous rating
· PTFE Impregnated slit tape - FDA Food Contact
Approved.
· 550°F / 287°C continuous use in harsh chemical
environments.
· Used to make low friction area in guides and
chutes for product and packaging motion.
· Used as a high temperature protection tape in
hot wire sealers and bag closure machines.
Approved.
· 550°F / 287°C continuous use in harsh chemical
environments.
· Used to make low friction area in guides and
chutes for product and packaging motion.
· Used as a high temperature protection tape in
hot wire sealers and bag closure machines.
Industrial Tape:
Mil Spec Tape:
Pressure Sensitive Adhesive Mounting Spray & Tape.
400°F / 204°C continuous rating
400°F / 204°C continuous rating
· This tape can be added to any of the insulation tapes,
fabrics, or insulations so those materials can be mounted
on a flange and stay in place while other fastening
techniques are used to secure the tape.
fabrics, or insulations so those materials can be mounted
on a flange and stay in place while other fastening
techniques are used to secure the tape.
