Silicone, Fiberglass, Nomex®, Silica, Ceramic Insulation Felts / Batting:
High Temperature, Heat, Flame & Fire Resistant Thermal Insulation (lagging) Felt & Batt
                     Non-respirable, low smoke, environmentally safe.  High purity and low or no binder burnout. 
Very High Temperature Insulation Lagging :
Needled Fiberglass Felt Batts
1000°F / 537°C continuous rating, high insulation value &
excellent personnel protection
·   Very high temperature needled fiberglass insulation (lagging) is used to drape, shield
    and insulate various industrial, commercial, marine and aerospace components such as valves,
    actuators, hydraulic cylinders, electronic enclosures, air handling ducts, engine exhaust and
    muffler systems.  Most often used as the insulation material for fabricated blankets and
    covers, with high temperature fabric or metal mesh holding the needled insulation into place
    on both sides.
·   Available thickness: 1/4" (roll length = 100 feet), 1/2" (roll length = 75 feet)
    and 1" (roll length = 45 feet).  Sold by-the-yard. Roll width 60" (5 feet).
Fiberglass Needled Insulation
Extreme High-Temperature Insulation Lagging:
Needled Silica Felt Batts
Silica protection products with 2300°F / 1260°C continuous rating
· Generally, Silica high-temperature products can be used to 2000°F / 1093°C
continuously, and 2300°F / 1260°C for extended periods without degradation.
It melts above 3000°F / 1648°C.

·  Silica needled insulation is an excellent alternative or replacement for RCF
    (Refractory Ceramic Fiber) and asbestos insulation.
·  Available thickness: 1/4" (roll length = 99 feet), 1/2" (roll length = 49 feet),
    1" (roll length 26 feet).  Sold in full rolls only. Roll width is 36" (3 feet).
InSilMax Silica Needled Insulation

See an example of needled insulation in a custom fabricated pipe sleeve

DeltaGlass High Temperature Heat Flame Fire Resistant Needled Fiberglass Insulation
InSilMax High Temperature Heat Flame Fire Resistant Needled Silica Insulation
Extreme High Temperature Insulation Lagging:
Needled Ceramic Fiber Felt Batts
1000°F / 537°C continuous rating, high insulation value &
excellent personnel protection
Extreme High-Temperature Insulation Lagging:
Needled Vitreous Silicate Felt Batts
Silica protection products with 2300°F / 1260°C continuous rating
CerMax High Temperature Heat Flame Fire Resistant Needled Ceramic Insulation
High Temperature Heat Flame Fire Resistant Needled Silica Insulation

DeltaMax Low & Ultra-Low Thermal Conductivity Insulating Foam
500°F / 260°C continuous rating, high insulation value
·   A unique proprietary insulation material available in two versions, offering low and ultra-low
     thermal conductivity and excellent performance for insulation requirements for low clearance
     applications.  Typically the thickness of silicone foam insulations for the same application.

·   Can be multi-layered.  Total thickness 0.084 per layer.  A .002 thick cured silicone coating on
     both sides, encapsulating a proprietary .080 core insulating material.

·   Extremely flexible and light weight.  Excellent for adding thermal insulation value to piping and
     vessels in tight constraints and also for equipment utilizing band or strip electrical heaters.

·   DM-1 provides 0.06 W/(m.K) thermal conductivity at 200C.  Weighs 16.7 oz/y2. DM-1 provides
    a 81C temperature gradient (169C surface temperature) with a 250C source with a single layer.

·   DM-2 provides 0.03 W/(m.K) thermal conductivity at 200C.  Weighs 15.7 oz/y2.  DM-2 provides
    a 122C temperature gradient (128C surface temperature) with a 250C source with a single layer.
DeltaMax Low Ultra-Low Thermal Conductivity Insulation Foam Silicone Alternative
Ceramic Needled Insulation
Low Thermal Conductivity Felt
Vitreous Silicate Needled Insulation
InSilMax XT Silica Needled Insulation

high temperature heat resistant needled nomex kevlar insulation felt pads
PyroTection Needled Nomex and Kevlar Insulation Felt Pads
high insulation value
Needled Nomex & Kevlar Insulation
·   Needled insulation can be used for equipment and pipe protection, and also as a pad for handling
    hot process materials.  Also used as a filtration media.

Return To Main Page
Share this page.....
1/15