Molten metals simply slide off of the extra heavy duty coating of High-Temperature Silicone Rubber on all of these products (firesleeve), providing excellent burn-through protection.
El revestimiento industrial FlameGuard la cinta está diseñado para proteger mangueras, alambres y cables de los peligros de la alta temperatura y las llamas ocasionales. Protege constantemente hasta 260°C / 500°F y soporta una salpicadura de fundido a 1200°C / 2200 F. Fabricado de hilos fibra de vidrio de punto de en un sustrato flexible, luego se cubre con goma silicónica de alta calidad.
Es resistente a líquidos hidráulicos, aceites lubricantes y combustibles, FlameGuard la cinta aísla contra la pérdida de energía en tuberías y mangueras; protege a los empleados de quemaduras y permite el empaquetado de hilos, mangueras y cables. Puede aplicarse en tuberías y cables de gran diámetro y permite la instalación en ensamblajes existentes de manguera y cable donde es imposible o poco práctico desarmar.
Es resistente a líquidos hidráulicos, aceites lubricantes y combustibles, FlameGuard la cinta aísla contra la pérdida de energía en tuberías y mangueras; protege a los empleados de quemaduras y permite el empaquetado de hilos, mangueras y cables. Puede aplicarse en tuberías y cables de gran diámetro y permite la instalación en ensamblajes existentes de manguera y cable donde es imposible o poco práctico desarmar.
Withstands Molten Splash & Welding Splatter. Withstands 500°F / 260°C continuous exposure;
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
High Temperature Silicone Rubber Coated Fiberglass Heavy Duty Woven Tape & Wrap: Non-Adhesive
Heavy Duty Woven fiberglass (fibreglass or glass-fibre) tape coated with high temperature silicone rubber.
This tape is fabricated from a woven fiberglass substrate, and in available in widths up to 40" wide and lengths up to 150 feet continuous. Due to the base material being woven, this tape has very little elasticity or ability to stretch in any direction, although it is easily wrapped over even small diameter hoses, pipes, cables or wires.
This tape is fabricated from a woven fiberglass substrate, and in available in widths up to 40" wide and lengths up to 150 feet continuous. Due to the base material being woven, this tape has very little elasticity or ability to stretch in any direction, although it is easily wrapped over even small diameter hoses, pipes, cables or wires.
High Temperature Silicone Rubber 2 Side Coated Fiberglass Tape & Wrap: Non-Adhesive
Fiberglass (fibreglass or glass-fibre) tape coated on two sides with high temperature silicone rubber.
This tape is fabricated from a woven fiberglass substrate, and in available in widths up to 40" wide and lengths up to 150 feet continuous.
This tape is fabricated from a woven fiberglass substrate, and in available in widths up to 40" wide and lengths up to 150 feet continuous.
Withstands Molten Splash & Welding Splatter. Withstands 500°F / 260°C continuous exposure;
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
Materials that resist catching fire, burn slowly, or retard burning can be described as either "incombustible", "non-flammable", "non-combustible", "fire-resistant" or "fire-retardant". "Self-extinguishing" materials cease burning once the flame or heat source is removed. "Fireproof" is understood to mean that an object cannot burn, but few materials are truly fireproof.
Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature. They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.
Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler ä. All products are non-asbestos and 100% asbestos free
Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature. They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.
Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler ä. All products are non-asbestos and 100% asbestos free
500°F / 260°C Constantemente
Fabricado de hilos de punto de fibra de vidrio luego se
cubre con goma silicónica
Fabricado de hilos de punto de fibra de vidrio luego se
cubre con goma silicónica