375°F / 190°C Continuous Exposure
SuperGuardTM Hydraulic Hose Blowout protection sleeve.
This hose protection sleeve is fabricated from a tight and dense weave of nylon, that conforms to EN982, EN414, ISO3457, ISO4413 specifications.
Can be cut to length with shears or heat knife.
Features a double layer - Outer shell is a high density tight nylon weave while the inner layer is a nylon-polyester blend.
If the inner layer becomes visible (a yellow color), then the sleeve should be replaced due to wear compromising the safety rating.
SuperGuardTM Hydraulic Hose Blowout protection sleeve.
This hose protection sleeve is fabricated from a tight and dense weave of nylon, that conforms to EN982, EN414, ISO3457, ISO4413 specifications.
Can be cut to length with shears or heat knife.
Features a double layer - Outer shell is a high density tight nylon weave while the inner layer is a nylon-polyester blend.
If the inner layer becomes visible (a yellow color), then the sleeve should be replaced due to wear compromising the safety rating.
Hydraulic Hose Blowout and Abrasion/Wear Protection Sleeve
Meets EN982, EN414, ISO3457, ISO4413
Meets EN982, EN414, ISO3457, ISO4413
Part Number
S-NY-BPS
S-NY-BPS
Click Image
To Open
Catalog Page
Catalog Page
Share this page.....
1/18
