Molten metals simply slide off of the extra heavy duty coating of High-Temperature Silicone Rubber on all of these products, providing excellent burn-through protection.
500°F / 260°C Continuous Exposure: Higher Intermittent
High Temperature, Heat & Flame Resistant Fabrics: ThermalShieldä SR Fabrics
Silicone Rubber Coated High-Temperature & Heat Resistant Fiberglass Fireblanket
High Temperature, Heat & Flame Resistant Fabrics: ThermalShieldä SR Fabrics
Silicone Rubber Coated High-Temperature & Heat Resistant Fiberglass Fireblanket
ThermalShieldä
High-Temperature
Fabrics & Fireblankets
High-Temperature
Fabrics & Fireblankets
ThermalShieldä SR18 / SR15 / SR8
18oz/yd2 - 15oz/yd2 - 8.5oz/yd2
fireblanket - : coated two sides
18oz/yd2 - 15oz/yd2 - 8.5oz/yd2
fireblanket - : coated two sides
ThermalShieldä SR-32
32oz/yd2 fireblanket: coated two sides
32oz/yd2 fireblanket: coated two sides
ThermalShieldä SR-98
98oz/yd2 coated one side
98oz/yd2 coated one side
The extra thick special formulation of silicone rubber over the heaviest high temperature base fabric sheds molten metals, slag, welding splatter, electrical or grinding sparks and contamination. Also provides protection from ozone, UV and abrasion.
This Heady Duty roll fabric is supplied in 40" widths and weighs 98 oz/sq yd. Cut to length, or supplied in 50, 100 and 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
This Heady Duty roll fabric is supplied in 40" widths and weighs 98 oz/sq yd. Cut to length, or supplied in 50, 100 and 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
This is a medium weight fabric, suitable for light molten splash, weld splatter and grinding spark protection. The base fabric is coated on both sides with our special formulation of silicone rubber . Easy to work with when fabricating complex shapes for covers and shields. Provides against ozone, UV and abrasion.
Supplied in 60" widths and weighs 34 oz/sq yd. Cut to length or supplied in 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
Supplied in 60" widths and weighs 34 oz/sq yd. Cut to length or supplied in 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
These lighter weight fabrics are used for light weld splatter and grinding protection, and is often used on the cold side of fabrications.
Very easy to work with when fabricating complex shapes for covers and shields. Provides against ozone, UV and abrasion.
Supplied in 60" widths. Cut to length or supplied in 150 foot lengths.
Various fasteners can be attached by sewing or crimping, allowing a variety of complex shapes to be fabricated.
Very easy to work with when fabricating complex shapes for covers and shields. Provides against ozone, UV and abrasion.
Supplied in 60" widths. Cut to length or supplied in 150 foot lengths.
Various fasteners can be attached by sewing or crimping, allowing a variety of complex shapes to be fabricated.
Withstands Molten Splash & Heavy Welding Splatter. Withstands 500°F / 260°C continuous exposure;
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
Materials that resist catching fire, burn slowly, or retard burning can be described as either "incombustible", "non-flammable", "non-combustible", "fire-resistant" or "fire-retardant". "Self-extinguishing" materials cease burning once the flame or heat source is removed. "Fireproof" is understood to mean that an object cannot burn, but few materials are truly fireproof.
Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature. They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.
Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler ä. All products are non-asbestos and 100% asbestos free
Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature. They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.
Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler ä. All products are non-asbestos and 100% asbestos free
The following weights of fabric are available:
· 98 oz/yd2 Coated 1 side. Approximately 0.125" / 3.175mm thick.
The heaviest heat protection fabric available and especially suited to
heavy duty molten splash and slag applications.
· 50 oz/yd2 Coated 1 side. Approximately 0.063" / 1.6mm thick.
Medium-Heavy heat protection fabric.
Excellent weld splatter protection and light molten metal splash.
· 32 oz/yd2 Coated 2 sides. Approximately 0.032" / 0.81mm thick.
Medium weight heat protection fabric with great flexibility. Good weld
splatter protection and used as the cold side covering on insulation blanket
systems for engine and generator exhausts.
· 22 oz/yd2 Coated 2 sides. Approximately 0.017" / 0.43mm thick.
Light weld splatter, grinding and thermal protection fabric with great flexibility.
Used as the cold side covering on insulation blanket systems for engine
and generator exhausts
· 18 oz/yd2 Coated 2 sides. Approximately 0.015" / 0.38mm thick.
Light weight heat protection fabric. Used for the cold side of fabrications.
· 15 oz/yd2 Coated 2 sides. Approximately 0.014" / 0.36mm thick.
Light weight heat protection fabric.
· 8.5 oz/yd2 Coated 2 sides. Approximately 0.009" / 0.23mm thick.
Lightest weight heat protection fabric.
ThermalShieldä SR-50
50oz/yd2 coated one side
50oz/yd2 coated one side
This heavy fabric features a smooth and fine substrate weave, and is also highly flexible, allowing it to conform easily and flex with cable and hose movement. It sheds molten metals, slag, welding splatter, electrical or grinding sparks and contamination. Also provides protection from ozone, UV and abrasion.
This Heady Duty roll fabric is supplied in 36" widths and weighs 50 oz/sq yd. Cut to length, or supplied in 50, 100 and 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
This Heady Duty roll fabric is supplied in 36" widths and weighs 50 oz/sq yd. Cut to length, or supplied in 50, 100 and 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
ThermalShieldä SR-22
22oz/yd2 fireblanket: coated two sides
22oz/yd2 fireblanket: coated two sides
This is a medium weight fabric, suitable for light molten splash, weld splatter and grinding spark protection. The base fabric is coated on both sides with our special formulation of silicone rubber . Easy to work with when fabricating complex shapes for covers and shields. Provides against ozone, UV and abrasion.
Supplied in 60" widths and weighs 34 oz/sq yd. Cut to length or supplied in 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
Supplied in 60" widths and weighs 34 oz/sq yd. Cut to length or supplied in 150 foot lengths.
Various fasteners can be attached by sewing, crimping or bolting through the fabric; allowing a variety of complex shapes to be fabricated.
These high temperature, heat & flame resistant silicone rubber coated fiberglass (fibreglass) fabrics are used to protect a variety of hoses, lines, wires, cables and equipment assemblies such as electronic enclosures, valves, robotic heads, festoon cables, EAF cables, etc., from exposure to high temperature, heat, flame, molten metal splash, slag, welding splatter, UV light, abrasion and contamination.
These fabrics are also used as the outside cover for thermal blanket systems for engine and generator exhaust system components such as turbo covers, supercharger covers, muffler and silencer covers. exhaust system covers.
These fabrics are also used as the outside cover for thermal blanket systems for engine and generator exhaust system components such as turbo covers, supercharger covers, muffler and silencer covers. exhaust system covers.