Radiant Heat Reflective Split Sleeve with Adhesive Strip Closure
High Temperature and Heat Resistant for wire, cable hose and tubing protection
Radiant
Heat Reflective Sleeve
Heat Reflective Sleeve
1000°F / 537°C Peak Exposure:
450°F / 232°C Continuous
This high temperature, heat resistant and radiant heat reflective sleeve can be used to protect industrial wires, cables, hoses (hydraulics), piping and tubing from radiant heat sources such as glowing steel slab, liquid metal pour stream, infrared heaters and other similar sources.
This aluminized PET film coated fiberglass split sleeve has an adhesive strip along one long edge to close the sleeve after installation.
This sleeve reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables, hoses and wires cool.
Available in sizes from 1/4" through 2" ID. The length of these sleeves is 4 feet / 121.9 cm .
This sleeve is also used extensively for automotive, construction, mining and truck under-hood engine compartment applications.
The fiberglass substrate also has a PET inserted filament included with the fiberglass fibers, resulting in a sleeve that resists crushing and actively pushes back against compression.
450°F / 232°C Continuous
This high temperature, heat resistant and radiant heat reflective sleeve can be used to protect industrial wires, cables, hoses (hydraulics), piping and tubing from radiant heat sources such as glowing steel slab, liquid metal pour stream, infrared heaters and other similar sources.
This aluminized PET film coated fiberglass split sleeve has an adhesive strip along one long edge to close the sleeve after installation.
This sleeve reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables, hoses and wires cool.
Available in sizes from 1/4" through 2" ID. The length of these sleeves is 4 feet / 121.9 cm .
This sleeve is also used extensively for automotive, construction, mining and truck under-hood engine compartment applications.
The fiberglass substrate also has a PET inserted filament included with the fiberglass fibers, resulting in a sleeve that resists crushing and actively pushes back against compression.
Part Number
S-FG-AL-ACL
S-FG-AL-ACL
Click Image
To Open
Catalog Page
Catalog Page
Share this page.....
3/18
