Molten metals simply slide off of the extra heavy duty coating of High-Temperature Silicone Rubber on all of these products (firesleeve), providing excellent burn-through protection.
464°F / 240°C Continuous Exposure: Higher Intermittent
High Temperature, Heat, Flame, Fire Resistant Silicone Rubber Coated
Fiberglass Sleeve for Wiring: UL / CSA Rated
High Temperature, Heat, Flame, Fire Resistant Silicone Rubber Coated
Fiberglass Sleeve for Wiring: UL / CSA Rated
Withstands Molten Splash & Welding Splatter. Withstands 500°F / 260°C continuous exposure;
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
Materials that resist catching fire, burn slowly, or retard burning can be described as either "incombustible", "non-flammable", "non-combustible", "fire-resistant" or "fire-retardant". "Self-extinguishing" materials cease burning once the flame or heat source is removed. "Fireproof" is understood to mean that an object cannot burn, but few materials are truly fireproof.
Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature. They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.
Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler ä. All products are non-asbestos and 100% asbestos free
Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature. They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.
Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler ä. All products are non-asbestos and 100% asbestos free
This thin-wall high temperature, heat, flame and fire resistant firesleeve (sometimes spelled fire sleeve or fire-sleeve or fyresleeve) is the perfect choice for protecting small diameter pneumatic lines, fuel & oil lines, brake lines, wires and cables from exposure to high and extreme heat conditions. The thin-wall fiberglass substrate and smooth silicone rubber on this firesleeve sheds molten metals, slag, welding splatter, electrical or grinding sparks and contamination. Also provides protection from ozone, UV and abrasion. This product is UL/CSA approved and used on a wide variety of equipment such as fixtures, appliances and motors for wiring protection.
This sleeve is available only in oxide-red and black.
This sleeve is only available in full spool lengths shown in the catalog.
This sleeve is available only in oxide-red and black.
This sleeve is only available in full spool lengths shown in the catalog.
Thin wall small diameter precision firesleeve