AluMaxTM This high temperature, heat resistant poly-layered aluminum coated fabric reflects radiant heat and is the perfect protection for covering equipment that is in close proximity to intense radiant sources such as super-hot metal slabs, liquid and molten metals or glass, open flame/plasma or engine exhaust manifolds. Excellent long term flexibility for use in garments, with or without liner materials.
This heat reflective fabric reflects 95% or more of the radiant heat that contacts its surface. Constructed from a high-temperature base filament or texturized fiberglass fabric.
The base fabric will withstand continuous operation at1000°F / 537°C, this fabric will withstand short duration exposure up to 1115°F / 600°C and up to 3000°F / 1650°C for very short durations. .
Available in the following base fabric weights:
Filament woven substrate: 8, 11, 15 oz/sq/yd
Textrized woven substrate: 12.5, 22 and 26 oz/sq/yd.
This fabric is also available with a self-adhesive backing. The adhesive is acrylic based, and will burn-off or vaporize at temperatures above 400°F. If prolonged use of the self-adhesive fabric above 400°F is desired, then alternate securing methods such as fasteners, wire or clamps should be used. Personnel should avoid inhaling fumes from the PSA.
Heat Reflecting Aluminum Film Coated Fiberglass Fabric Cloth
High Temperature, Heat Resistant & Heat Reflecting
Poly-layered Aluminum Coated Radiant
Heat Reflective Fiberglass Fabric
Share this page.....