3MTM Scotch® 70 Equivalent Type I & Type II
Self Fusing Electrical Insulating Silicone Rubber Tape
FlameShieldä 3MTM Scotch® 70 equivalent silicone rubber self-fusing compression tapes meet many MIL and other specifications (such as MIL-I-46852 and AA-59163 and MIL-I-22444) and are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
The tape has no adhesive, but sticks to itself (self-fuses or self amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
These tapes may be either red or black.
Available unsupported (no fiberglass substrate) or supported (with fiberglass substrate); the substrate limits the stretch of the tape to a maximum of 15% elongation. Unsupported tape has elongation of 300 to 500% minimum (thinner tape is 500%, thicker tape is 300%)
This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts.
Simrit Freudenberg NOK Electrical Insulting Silicone Rubber Tapes
· Resists moisture, oxygen, UV, ozone and corona
· Conforms smoothly around irregular forms
· No adhesive or sticky residue like other tapes
Share this page.....